German 50x420R tank shell – 5cm Pzgr.Patr.39 (KwK.39, PaK.38, BK-5)
Wooden replica of the German 5cm Pzgr.Patr.39 (1939-1944) – Armor-piercing capped High-Explosive tank & anti-tank cannon shell with Tracer (APC-HE-T). Casing type: 50x420R rimmed. German full designation: 5cm Panzergranatpatrone 39
. And that was the standard ordnance for a German WW2 long-barrel improved tank cannon 5cm KwK.39 L/60 mounted on the serial medium tanks Pzkpfw.III (Ausf. J1, L, M) and also on the heavy armored cars SdKfz.234-2 “Puma” and on experimental light tanks VK-1602 “Leopard”. The most commonly encountered on all fronts anti-tank cannons 5cm PaK.38 were also loading with the same ammo types fitted with percussion base primers – not the electric ones, like tanks did. Even heavy aircraft cannons “BK-5” (5cm Bordkanone.5) and also “MK-214A” were firing same APC shells! Production period for current ordnance is 1939-44. Depends on the cannon type, there were different shells in range for each one. Anyway, the full ammo range for those 5cm guns above consist of 7 various shell types equipped with 420mm rimmed shell-casings: Sprgr.Patr.38, Pzgr.Patr, Pzgr.Patr.39, Pzgr.Patr.40, Pzgr.Patr.40/1, M-Gesch.Patr. BK.o.Zerl and M-Gesch.Patr. L’spur.BK.m.Zerl. Current shell types could be seen made for various calibers, and the 5cm caliber was the most common for German tanks and field artillery in the very beginning and in the middle of WW2. Even Luftwaffe heavy fighters took the same ordnance for the large caliber aircraft auto-cannons BK-5 and MK-214A equipped with electric priming system, like tanks did. Same “5cm Panzergranatpatrone.39” warheads could be fitted on various casings – for different artillery systems of the same caliber. Several versions of the shell were made, but the changes were usually minor. For example, there could be improved FES sintered iron driving band instead of KPS copper one; material V-structure on the nose of the armor-piercing body; driving bands could be also made wider because of higher gas pressure within those long-barreled guns etc.
This 5cm Pzgr.Patr.39 improved shell was fitted with an armor-piercing penetrative cap in the form of a cone with the apex cut away. This gives the round good contact with inclined armor plates, avoids slip outs and ricochets therefore better performance than the early type 5cm Pzgr.Patr. The nose of the cap is shaped to form a point. The shell with its cap is painted black and stenciled in red. The cartridge case has an embossed model number “6360 St” and the designation of the equipment “5cm PaK” stamped in the base, as well as factory code, delivery number, proof mark of the military inspector and the year of manufacture. Paint markings relating to the equipment and the propellant charge weight, nature and size, as well as shell assembly date, powder delivery and factory number are stenciled on the side of the case in black. The overall length of the round is about 557mm. The shell deemed as High-explosive APC because of the cavity for the bursting charge inside the armor-piercing body. It was closed at the base by the base fuse Bd.Z.5103* with tracer. Tracer bush was screwed into the base of the fuse and was of the normal type consisting of a steel body with a steel liner and closing disc and a celluloid disc at the base. The rimmed shell-case is of the necked type and is about 420mm in length. As indicated by the letters “St” stamped after the case model number in the base, the case is of steel and is coated with brass. The common weight of the propellant charge, according to the markings, is 900g and was stenciled on the side of the shell-case. The charge was contained in a cotton bag with an igniter (additional charge) bag formed at the base. The propellant was in tubular form, the dimensions of the powder tubes were included within the stenciled marks on the side of the casing.
The abbreviation “FES” here on this type of fixed shell, found on many German projectiles and casings, indicates the specific sintered iron driving band, instead of “KPS” (bimetallic copper & steel) driving band. A measure taken due to shortages of expensive metals and alloys, and also to eliminate the negative coppering effect on the barrels’ rotating grooves.
Another shells of the same 50x420R caliber also available: 5cm Sprgr.Patr.38, 5cm Pzgr.Patr.40, 5cm Pzgr.Patr, 5cm Pzgr.Patr.40/1
This German tank shell replica demonstrates the details, precise forms, authentic embossed lettering, copper/steel driving band reproduction, original color scheme, authentic marks and base primer accurate imitation (bronze/steel). Shell replica looks genuine, but is made of solid wood! It is a worthy example for any private display, re-enactments, museums or just impressive souvenir and room rare decoration. Current replica shell looks great within a shell set – among another replica rounds of the same ammunition type, that also available here on my web. To look more realistic with proper age, this German shell replica took some weathering – additional color effects are adding to achieve the slightly scuffed look for a wartime ordnance unit. After all, shell replicas must represent wartime ordnance with specific realistic look that close to original. Please note: current shell replica is a handmade product, so any additionally added shades & color effects may slightly differ.
Caliber: 50mm
Shell Case: 50x420R
Max Diameter: 78.5mm
Overall Height: 557mm
Replica Weight: 890g.
ITEM FOR DISPLAY ONLY!
Submit your inquiry, please !
![]()
Sets may include: 1 to 7 various handmade replica shells, with special display stands or without. All the stands are making out of wood, there are steel secure rings for vertical position or MDF holders for horizontal one. So this way, ordnance display stands can be either vertical or horizontal. All the ammo display stands are carrying metal plates with specific weapon & ordnance main reference. Those plates are fixed with shiny brass rivets to the base. Horizontal type display stands, while the shell replica is staying securely in place, allow good observation of the shell sides, the embossed base factory codes, as well as base primers on the bottom. Both designs of the display stands allow replica ordnance to stay secure in position – vertically or horizontally, on your choice, same time making visible weapon & ordnance reference.
Videos & pictures below showing German tanks and field cannons, even Luftwaffe heavy fighter aircraft auto-cannons that were firing same type 5cm Panzergranatpatrone.39 as standard ordnance:































































Soviet 45×186 OZT round (HEIT) big calib…
Horizontal Display stand — for Russian IL-2 c…
German 30x91RB shell – 3cm M-Gesch. Pat…
Soviet 37×198 OZT shell (HEIT) for aircr…
German shell 20×82 M-Gesch.Patr – …
German 30x91RB shell – 3cm Pzbrsprgr.Pa…
German 37x265B shell – 3.7cm H-Pzgr.Pat…
Vertical Display stand – for Russian IL…
I just received this shell from Igor and I am amazed at the quality of workmanship! It looks better in person than the photos in the catalog! The dimensions I checked showed spot on accuracy! I also wanted a Panzer II shell, 20x138Bmm, but it wasn’t listed in the catalog. Igor was still able to make one for me and it is equally as beautiful and accurate! I will be buying again!
John S., USA